Hamilton Purge and Trap Syringes
  • Chromatography
  • Liquid Handling
  • Reference Materials
  • | Tel: 01702 555577
  • |
  • | email: sales@esslab.com

Hamilton Liquid Handling
Purge and Trap Syringes
spacer

5 mL - 25mL

  • Hamilton 5 and 25 mL SampleLock Purge
    & Trap syringes were designed for the analysis
    of drinking water samples according to EPA
    purge and trap concentration techniques
    (see EPA methods 502.1, 502.2, 503.1, 524.1
    and 524.2)
  • These syringes are ideal for Purge & Trap,
    because you can easily remove the syringe plunger
    and load water samples into the syringe barrel.
    You can add an internal standard or surrogate
    sample directly to your sample through the twist
    valve with a 10 µL syringe. Or, you can connect
    the sample syringe directly to the purge and trap valve via the integral male luer fitting.
 
Ordering Information
spacer
   
 
Part No.
Model
Description
spacer
1005 SLPT
5mL Purge & Trap Syringe
spacer
1025 SLPT
25mL Purge & Trap Syringe
spacer
701 N
10 µL (26s/51/2) for adding an internal calibration standard or surrogate sample to the Purge & Trap syringe
spacer
HVDP 2-5
Purge & Trap Syringe with female luer fitting for use with Tekmar™ and O-I purge and trap concentrators
 
 
Operating Parameters:
  • Max temperature is 50°C
  • Max test pressure is 6 bar
 
Easily remove the syringe plunger and load water samples into the syringe barrel Add an internal standard or surrogate sample directly to your sample through the twist valve with a 10 µL syringe Connect the sample syringe directly to the purge and trap valve via the integral male luer fitting
Purge Trap Guide
Purge Trap Guide
Purge Trap Guide
Featured: